crowd control barriers Melbourne

Crowd control barriers Melbourne is built from high-quality carbon steel and is hot-dipped galvanized inside and out to prevent rust and corrosion and ensure long term weather resistance.

2018-12-24-15-42-004

1. Specification of Melbourne Crowd Control Barriers

Length 2.0m, 2.1m, 2.2m ,2.5m

 

Height 0.9m, 1.0m, 1.1m, 1.2m

 

Frame O.D 32mm, 38mm ,25mm

 

Frame Thickness 1.3mm, 1.4mm, 1.5mm, 1.8mm, 2.0mm

 

crowd control barriers Melbourne Infill Pickets O.D 16mm, 20mm, 25mm

 

Infill Pickets Thickness 1.0mm, 1.2mm, 1.5mm

 

Spacing 100mm, 120mm, 150mm, 190mm etc.

 

Surface Treatment 1> Hot-dipped galvanized

2> Hot-dipped galvanized pipes + paint

 

Feet Type  

Fixed Leg, Bridge Leg, Flat Leg

3. Base type of crowd control barriers

  •  V type foot
  •  flat type foot
  • bridge-type foot
  • Swinging or Sliding Gates and Barricade Arches

Use gates intermittently among long-running lines of barriers to allow controlled access through the line. This will enable officials, police barriers, and EMS personnel to open a gate when necessary for
official/emergency purposes. A gate can also act as a “floodgate” to relieve heavy congestion for crowd traffic flow. Gates provide you with a necessary “emergency back door” in case of unforeseen circumstances:

  • Allow for controlled breaks in long lines of interlocking steel barricades
  • Permits the police or EMS personnel the ability to break through crowd control barriers in emergencies
  • All the weight is on the wheels (not on the hinged side)
  • A heavy-duty steel latch locks the gate into the next steel barrier for a continual run of connecting frames
  • Three standard international lengths in stock to match three basic hook variations

4. Finish crowd control barriers

As per the specs and drawing, the whole panel is hot dipped galvanized after welding. The barrier is polished after galvanizing so that no burrs sharp points hurt the workers.

2018-12-24-15-32-305-1

5. Advantages 

Hot-dip galvanizing technology is used after welding to make the crowd control barriers more beautiful and anticorrosive. It is not only light but also complex and straightforward to handle and transport. Movable feet are more convenient and efficient for transportation and storage. Hot-dip galvanized to protect steel.

6. Application 

Construction site  Demolition site·Public traffic  scenic area Bike rack barricades Sports fields Concert  Demonstration

2018-12-24-15-43-366-1

7. Packaging 

  • 1. in bulk, with containers
  • 2. or plastic inside, metal pallet outside
  • 3. standard export packaging
  • 4. custom packing is also available

2018-12-24-15-44-378-1

Features crowd control barriers Melbourne 

  • Excellent weight to length ratio
  • Easily installed by one person
  • Colourful for Outdoors
  • Flexible Feet Choice
  • Pedestrian & Vehicle Gate
  • Customization Service
  • Flexible Structure
  • Extra-long hooks for uneven ground
  • Hot dipped galvanized
  • Removable feet

Reviews

There are no reviews yet.

Be the first to review “crowd control barriers Melbourne”

Your email address will not be published.

Shopping Cart